// SPDX-License-Identifier: BSD-3-Clause /* * SDX65 SoC device tree source * * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved. * */ #include #include #include #include #include / { #address-cells = <1>; #size-cells = <1>; qcom,msm-id = <458 0x10000>, <483 0x10000>, <509 0x10000>; interrupt-parent = <&intc>; memory { device_type = "memory"; reg = <0 0>; }; clocks { xo_board: xo-board { compatible = "fixed-clock"; clock-frequency = <76800000>; clock-output-names = "xo_board"; #clock-cells = <0>; }; sleep_clk: sleep-clk { compatible = "fixed-clock"; clock-frequency = <32764>; clock-output-names = "sleep_clk"; #clock-cells = <0>; }; nand_clk_dummy: nand-clk-dummy { compatible = "fixed-clock"; clock-frequency = <32764>; #clock-cells = <0>; }; }; cpus { #address-cells = <1>; #size-cells = <0>; cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <0x0>; enable-method = "psci"; clocks = <&apcs>; power-domains = <&rpmhpd SDX65_CX_AO>; power-domain-names = "rpmhpd"; operating-points-v2 = <&cpu_opp_table>; }; }; cpu_opp_table: cpu-opp-table { compatible = "operating-points-v2"; opp-shared; opp-345600000 { opp-hz = /bits/ 64 <345600000>; required-opps = <&rpmhpd_opp_low_svs>; }; opp-576000000 { opp-hz = /bits/ 64 <576000000>; required-opps = <&rpmhpd_opp_svs>; }; opp-1094400000 { opp-hz = /bits/ 64 <1094400000>; required-opps = <&rpmhpd_opp_nom>; }; opp-1497600000 { opp-hz = /bits/ 64 <1497600000>; required-opps = <&rpmhpd_opp_turbo>; }; }; firmware { scm { compatible = "qcom,scm-sdx65", "qcom,scm"; }; }; mc_virt: interconnect-mc-virt { compatible = "qcom,sdx65-mc-virt"; #interconnect-cells = <1>; qcom,bcm-voters = <&apps_bcm_voter>; }; psci { compatible = "arm,psci-1.0"; method = "smc"; }; reserved_memory: reserved-memory { #address-cells = <1>; #size-cells = <1>; ranges; tz_heap_mem: memory@8fcad000 { no-map; reg = <0x8fcad000 0x40000>; }; secdata_mem: memory@8fcfd000 { no-map; reg = <0x8fcfd000 0x1000>; }; hyp_mem: memory@8fd00000 { no-map; reg = <0x8fd00000 0x80000>; }; access_control_mem: memory@8fd80000 { no-map; reg = <0x8fd80000 0x80000>; }; aop_mem: memory@8fe00000 { no-map; reg = <0x8fe00000 0x20000>; }; smem_mem: memory@8fe20000 { compatible = "qcom,smem"; reg = <0x8fe20000 0xc0000>; hwlocks = <&tcsr_mutex 3>; no-map; }; cmd_db: reserved-memory@8fee0000 { compatible = "qcom,cmd-db"; reg = <0x8fee0000 0x20000>; no-map; }; tz_mem: memory@8ff00000 { no-map; reg = <0x8ff00000 0x100000>; }; tz_apps_mem: memory@90000000 { no-map; reg = <0x90000000 0x500000>; }; llcc_tcm_mem: memory@15800000 { no-map; reg = <0x15800000 0x800000>; }; }; smp2p-mpss { compatible = "qcom,smp2p"; qcom,smem = <435>, <428>; interrupts = ; mboxes = <&apcs 14>; qcom,local-pid = <0>; qcom,remote-pid = <1>; modem_smp2p_out: master-kernel { qcom,entry-name = "master-kernel"; #qcom,smem-state-cells = <1>; }; modem_smp2p_in: slave-kernel { qcom,entry-name = "slave-kernel"; interrupt-controller; #interrupt-cells = <2>; }; ipa_smp2p_out: ipa-ap-to-modem { qcom,entry-name = "ipa"; #qcom,smem-state-cells = <1>; }; ipa_smp2p_in: ipa-modem-to-ap { qcom,entry-name = "ipa"; interrupt-controller; #interrupt-cells = <2>; }; }; soc: soc { #address-cells = <1>; #size-cells = <1>; ranges; compatible = "simple-bus"; gcc: clock-controller@100000 { compatible = "qcom,gcc-sdx65"; reg = <0x00100000 0x001f7400>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>; clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk"; #power-domain-cells = <1>; #clock-cells = <1>; #reset-cells = <1>; }; blsp1_uart3: serial@831000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0x00831000 0x200>; interrupts = ; clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; status = "disabled"; }; usb_hsphy: phy@ff4000 { compatible = "qcom,usb-snps-hs-7nm-phy"; reg = <0xff4000 0x120>; #phy-cells = <0>; status = "disabled"; clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "ref"; resets = <&gcc GCC_QUSB2PHY_BCR>; }; usb_qmpphy: phy@ff6000 { compatible = "qcom,sdx65-qmp-usb3-uni-phy"; reg = <0x00ff6000 0x1c8>; status = "disabled"; #address-cells = <1>; #size-cells = <1>; ranges; clocks = <&gcc GCC_USB3_PHY_AUX_CLK>, <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, <&gcc GCC_USB3_PRIM_CLKREF_EN>; clock-names = "aux", "cfg_ahb", "ref"; resets = <&gcc GCC_USB3PHY_PHY_BCR>, <&gcc GCC_USB3_PHY_BCR>; reset-names = "phy", "common"; usb_ssphy: phy@ff6200 { reg = <0x00ff6e00 0x160>, <0x00ff7000 0x1ec>, <0x00ff6200 0x1e00>; #phy-cells = <0>; #clock-cells = <0>; clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>; clock-names = "pipe0"; clock-output-names = "usb3_uni_phy_pipe_clk_src"; }; }; system_noc: interconnect@1620000 { compatible = "qcom,sdx65-system-noc"; reg = <0x01620000 0x31200>; #interconnect-cells = <1>; qcom,bcm-voters = <&apps_bcm_voter>; }; qpic_bam: dma-controller@1b04000 { compatible = "qcom,bam-v1.7.0"; reg = <0x01b04000 0x1c000>; interrupts = ; clocks = <&rpmhcc RPMH_QPIC_CLK>; clock-names = "bam_clk"; #dma-cells = <1>; qcom,ee = <0>; qcom,controlled-remotely; status = "disabled"; }; qpic_nand: nand-controller@1b30000 { compatible = "qcom,sdx55-nand"; reg = <0x01b30000 0x10000>; #address-cells = <1>; #size-cells = <0>; clocks = <&rpmhcc RPMH_QPIC_CLK>, <&nand_clk_dummy>; clock-names = "core", "aon"; dmas = <&qpic_bam 0>, <&qpic_bam 1>, <&qpic_bam 2>; dma-names = "tx", "rx", "cmd"; status = "disabled"; }; tcsr_mutex: hwlock@1f40000 { compatible = "qcom,tcsr-mutex"; reg = <0x01f40000 0x40000>; #hwlock-cells = <1>; }; remoteproc_mpss: remoteproc@4080000 { compatible = "qcom,sdx55-mpss-pas"; reg = <0x04080000 0x4040>; interrupts-extended = <&intc GIC_SPI 250 IRQ_TYPE_EDGE_RISING>, <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack", "shutdown-ack"; clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "xo"; power-domains = <&rpmhpd SDX65_CX>, <&rpmhpd SDX65_MSS>; power-domain-names = "cx", "mss"; qcom,smem-states = <&modem_smp2p_out 0>; qcom,smem-state-names = "stop"; status = "disabled"; glink-edge { interrupts = ; label = "mpss"; qcom,remote-pid = <1>; mboxes = <&apcs 15>; }; }; sdhc_1: mmc@8804000 { compatible = "qcom,sdx65-sdhci", "qcom,sdhci-msm-v5"; reg = <0x08804000 0x1000>; reg-names = "hc"; interrupts = , ; interrupt-names = "hc_irq", "pwr_irq"; clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>; clock-names = "core", "iface"; status = "disabled"; }; mem_noc: interconnect@9680000 { compatible = "qcom,sdx65-mem-noc"; reg = <0x09680000 0x27200>; #interconnect-cells = <1>; qcom,bcm-voters = <&apps_bcm_voter>; }; usb: usb@a6f8800 { compatible = "qcom,sdx65-dwc3", "qcom,dwc3"; reg = <0x0a6f8800 0x400>; status = "disabled"; #address-cells = <1>; #size-cells = <1>; ranges; clocks = <&gcc GCC_USB30_SLV_AHB_CLK>, <&gcc GCC_USB30_MASTER_CLK>, <&gcc GCC_USB30_MSTR_AXI_CLK>, <&gcc GCC_USB30_MOCK_UTMI_CLK>, <&gcc GCC_USB30_SLEEP_CLK>; clock-names = "cfg_noc", "core", "iface", "mock_utmi", "sleep"; assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>, <&gcc GCC_USB30_MASTER_CLK>; assigned-clock-rates = <19200000>, <200000000>; interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, <&pdc 76 IRQ_TYPE_LEVEL_HIGH>, <&pdc 18 IRQ_TYPE_EDGE_BOTH>, <&pdc 19 IRQ_TYPE_EDGE_BOTH>; interrupt-names = "hs_phy_irq", "ss_phy_irq", "dm_hs_phy_irq", "dp_hs_phy_irq"; power-domains = <&gcc USB30_GDSC>; resets = <&gcc GCC_USB30_BCR>; usb_dwc3: usb@a600000 { compatible = "snps,dwc3"; reg = <0x0a600000 0xcd00>; interrupts = ; iommus = <&apps_smmu 0x1a0 0x0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; phys = <&usb_hsphy>, <&usb_ssphy>; phy-names = "usb2-phy", "usb3-phy"; }; }; restart@c264000 { compatible = "qcom,pshold"; reg = <0x0c264000 0x1000>; }; spmi_bus: qcom,spmi@c440000 { compatible = "qcom,spmi-pmic-arb"; reg = <0xc440000 0xd00>, <0xc600000 0x2000000>, <0xe600000 0x100000>, <0xe700000 0xa0000>, <0xc40a000 0x26000>; reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "periph_irq"; interrupt-controller; #interrupt-cells = <4>; #address-cells = <2>; #size-cells = <0>; cell-index = <0>; qcom,channel = <0>; qcom,ee = <0>; }; tlmm: pinctrl@f100000 { compatible = "qcom,sdx65-tlmm"; reg = <0xf100000 0x300000>; interrupts = ; gpio-controller; #gpio-cells = <2>; gpio-ranges = <&tlmm 0 0 109>; interrupt-controller; interrupt-parent = <&intc>; #interrupt-cells = <2>; }; pdc: interrupt-controller@b210000 { compatible = "qcom,sdx65-pdc", "qcom,pdc"; reg = <0xb210000 0x10000>; qcom,pdc-ranges = <0 147 52>, <52 266 32>; #interrupt-cells = <2>; interrupt-parent = <&intc>; interrupt-controller; }; imem@1468f000 { compatible = "simple-mfd"; reg = <0x1468f000 0x1000>; ranges = <0x0 0x1468f000 0x1000>; #address-cells = <1>; #size-cells = <1>; pil-reloc@94c { compatible = "qcom,pil-reloc-info"; reg = <0x94c 0xc8>; }; }; apps_smmu: iommu@15000000 { compatible = "qcom,sdx65-smmu-500", "qcom,smmu-500", "arm,mmu-500"; reg = <0x15000000 0x40000>; #iommu-cells = <2>; #global-interrupts = <1>; interrupts = , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ; }; intc: interrupt-controller@17800000 { compatible = "qcom,msm-qgic2"; interrupt-controller; interrupt-parent = <&intc>; #interrupt-cells = <3>; reg = <0x17800000 0x1000>, <0x17802000 0x1000>; }; a7pll: clock@17808000 { compatible = "qcom,sdx55-a7pll"; reg = <0x17808000 0x1000>; clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "bi_tcxo"; #clock-cells = <0>; }; apcs: mailbox@17810000 { compatible = "qcom,sdx55-apcs-gcc", "syscon"; reg = <0x17810000 0x2000>; #mbox-cells = <1>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&a7pll>, <&gcc GPLL0>; clock-names = "ref", "pll", "aux"; #clock-cells = <0>; }; watchdog@17817000 { compatible = "qcom,apss-wdt-sdx65", "qcom,kpss-wdt"; reg = <0x17817000 0x1000>; clocks = <&sleep_clk>; }; timer@17820000 { #address-cells = <1>; #size-cells = <1>; ranges; compatible = "arm,armv7-timer-mem"; reg = <0x17820000 0x1000>; clock-frequency = <19200000>; frame@17821000 { frame-number = <0>; interrupts = , ; reg = <0x17821000 0x1000>, <0x17822000 0x1000>; }; frame@17823000 { frame-number = <1>; interrupts = ; reg = <0x17823000 0x1000>; status = "disabled"; }; frame@17824000 { frame-number = <2>; interrupts = ; reg = <0x17824000 0x1000>; status = "disabled"; }; frame@17825000 { frame-number = <3>; interrupts = ; reg = <0x17825000 0x1000>; status = "disabled"; }; frame@17826000 { frame-number = <4>; interrupts = ; reg = <0x17826000 0x1000>; status = "disabled"; }; frame@17827000 { frame-number = <5>; interrupts = ; reg = <0x17827000 0x1000>; status = "disabled"; }; frame@17828000 { frame-number = <6>; interrupts = ; reg = <0x17828000 0x1000>; status = "disabled"; }; frame@17829000 { frame-number = <7>; interrupts = ; reg = <0x17829000 0x1000>; status = "disabled"; }; }; apps_rsc: rsc@17830000 { label = "apps_rsc"; compatible = "qcom,rpmh-rsc"; reg = <0x17830000 0x10000>, <0x17840000 0x10000>; reg-names = "drv-0", "drv-1"; interrupts = , ; qcom,tcs-offset = <0xd00>; qcom,drv-id = <1>; qcom,tcs-config = , , , ; rpmhcc: clock-controller { compatible = "qcom,sdx65-rpmh-clk"; #clock-cells = <1>; clock-names = "xo"; clocks = <&xo_board>; }; rpmhpd: power-controller { compatible = "qcom,sdx65-rpmhpd"; #power-domain-cells = <1>; operating-points-v2 = <&rpmhpd_opp_table>; rpmhpd_opp_table: opp-table { compatible = "operating-points-v2"; rpmhpd_opp_ret: opp1 { opp-level = ; }; rpmhpd_opp_min_svs: opp2 { opp-level = ; }; rpmhpd_opp_low_svs: opp3 { opp-level = ; }; rpmhpd_opp_svs: opp4 { opp-level = ; }; rpmhpd_opp_svs_l1: opp5 { opp-level = ; }; rpmhpd_opp_nom: opp6 { opp-level = ; }; rpmhpd_opp_nom_l1: opp7 { opp-level = ; }; rpmhpd_opp_nom_l2: opp8 { opp-level = ; }; rpmhpd_opp_turbo: opp9 { opp-level = ; }; rpmhpd_opp_turbo_l1: opp10 { opp-level = ; }; }; }; apps_bcm_voter: bcm-voter { compatible = "qcom,bcm-voter"; }; }; }; timer { compatible = "arm,armv7-timer"; interrupts = <1 13 0xf08>, <1 12 0xf08>, <1 10 0xf08>, <1 11 0xf08>; clock-frequency = <19200000>; }; };