503 lines
12 KiB
Plaintext
503 lines
12 KiB
Plaintext
|
// SPDX-License-Identifier: GPL-2.0+
|
||
|
|
/*
|
||
|
|
* Copyright (C) 2019-20 Sean Anderson <seanga2@gmail.com>
|
||
|
|
* Copyright (C) 2020 Western Digital Corporation or its affiliates.
|
||
|
|
*/
|
||
|
|
#include <dt-bindings/clock/k210-clk.h>
|
||
|
|
#include <dt-bindings/pinctrl/k210-fpioa.h>
|
||
|
|
#include <dt-bindings/reset/k210-rst.h>
|
||
|
|
|
||
|
|
/ {
|
||
|
|
/*
|
||
|
|
* Although the K210 is a 64-bit CPU, the address bus is only 32-bits
|
||
|
|
* wide, and the upper half of all addresses is ignored.
|
||
|
|
*/
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <1>;
|
||
|
|
compatible = "canaan,kendryte-k210";
|
||
|
|
|
||
|
|
aliases {
|
||
|
|
serial0 = &uarths0;
|
||
|
|
serial1 = &uart1;
|
||
|
|
serial2 = &uart2;
|
||
|
|
serial3 = &uart3;
|
||
|
|
};
|
||
|
|
|
||
|
|
/*
|
||
|
|
* The K210 has an sv39 MMU following the privileged specification v1.9.
|
||
|
|
* Since this is a non-ratified draft specification, the kernel does not
|
||
|
|
* support it and the K210 support enabled only for the !MMU case.
|
||
|
|
* Be consistent with this by setting the CPUs MMU type to "none".
|
||
|
|
*/
|
||
|
|
cpus {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
timebase-frequency = <7800000>;
|
||
|
|
cpu0: cpu@0 {
|
||
|
|
device_type = "cpu";
|
||
|
|
compatible = "canaan,k210", "riscv";
|
||
|
|
reg = <0>;
|
||
|
|
riscv,isa = "rv64imafdc";
|
||
|
|
mmu-type = "riscv,none";
|
||
|
|
i-cache-block-size = <64>;
|
||
|
|
i-cache-size = <0x8000>;
|
||
|
|
d-cache-block-size = <64>;
|
||
|
|
d-cache-size = <0x8000>;
|
||
|
|
cpu0_intc: interrupt-controller {
|
||
|
|
#interrupt-cells = <1>;
|
||
|
|
interrupt-controller;
|
||
|
|
compatible = "riscv,cpu-intc";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
cpu1: cpu@1 {
|
||
|
|
device_type = "cpu";
|
||
|
|
compatible = "canaan,k210", "riscv";
|
||
|
|
reg = <1>;
|
||
|
|
riscv,isa = "rv64imafdc";
|
||
|
|
mmu-type = "riscv,none";
|
||
|
|
i-cache-block-size = <64>;
|
||
|
|
i-cache-size = <0x8000>;
|
||
|
|
d-cache-block-size = <64>;
|
||
|
|
d-cache-size = <0x8000>;
|
||
|
|
cpu1_intc: interrupt-controller {
|
||
|
|
#interrupt-cells = <1>;
|
||
|
|
interrupt-controller;
|
||
|
|
compatible = "riscv,cpu-intc";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
cpu-map {
|
||
|
|
cluster0 {
|
||
|
|
core0 {
|
||
|
|
cpu = <&cpu0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
core1 {
|
||
|
|
cpu = <&cpu1>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
sram: memory@80000000 {
|
||
|
|
device_type = "memory";
|
||
|
|
reg = <0x80000000 0x400000>, /* sram0 4 MiB */
|
||
|
|
<0x80400000 0x200000>, /* sram1 2 MiB */
|
||
|
|
<0x80600000 0x200000>; /* aisram 2 MiB */
|
||
|
|
};
|
||
|
|
|
||
|
|
sram_controller: memory-controller {
|
||
|
|
compatible = "canaan,k210-sram";
|
||
|
|
clocks = <&sysclk K210_CLK_SRAM0>,
|
||
|
|
<&sysclk K210_CLK_SRAM1>,
|
||
|
|
<&sysclk K210_CLK_AI>;
|
||
|
|
clock-names = "sram0", "sram1", "aisram";
|
||
|
|
};
|
||
|
|
|
||
|
|
clocks {
|
||
|
|
in0: oscillator {
|
||
|
|
compatible = "fixed-clock";
|
||
|
|
#clock-cells = <0>;
|
||
|
|
clock-frequency = <26000000>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
soc {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <1>;
|
||
|
|
compatible = "simple-bus";
|
||
|
|
ranges;
|
||
|
|
interrupt-parent = <&plic0>;
|
||
|
|
|
||
|
|
rom0: nvmem@1000 {
|
||
|
|
reg = <0x1000 0x1000>;
|
||
|
|
read-only;
|
||
|
|
};
|
||
|
|
|
||
|
|
clint0: timer@2000000 {
|
||
|
|
compatible = "canaan,k210-clint", "sifive,clint0";
|
||
|
|
reg = <0x2000000 0xC000>;
|
||
|
|
interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>,
|
||
|
|
<&cpu1_intc 3>, <&cpu1_intc 7>;
|
||
|
|
};
|
||
|
|
|
||
|
|
plic0: interrupt-controller@c000000 {
|
||
|
|
#interrupt-cells = <1>;
|
||
|
|
#address-cells = <0>;
|
||
|
|
compatible = "canaan,k210-plic", "sifive,plic-1.0.0";
|
||
|
|
reg = <0xC000000 0x4000000>;
|
||
|
|
interrupt-controller;
|
||
|
|
interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>,
|
||
|
|
<&cpu1_intc 11>, <&cpu1_intc 9>;
|
||
|
|
riscv,ndev = <65>;
|
||
|
|
};
|
||
|
|
|
||
|
|
uarths0: serial@38000000 {
|
||
|
|
compatible = "canaan,k210-uarths", "sifive,uart0";
|
||
|
|
reg = <0x38000000 0x1000>;
|
||
|
|
interrupts = <33>;
|
||
|
|
clocks = <&sysclk K210_CLK_CPU>;
|
||
|
|
};
|
||
|
|
|
||
|
|
gpio0: gpio-controller@38001000 {
|
||
|
|
#interrupt-cells = <2>;
|
||
|
|
#gpio-cells = <2>;
|
||
|
|
compatible = "canaan,k210-gpiohs", "sifive,gpio0";
|
||
|
|
reg = <0x38001000 0x1000>;
|
||
|
|
interrupt-controller;
|
||
|
|
interrupts = <34>, <35>, <36>, <37>, <38>, <39>, <40>,
|
||
|
|
<41>, <42>, <43>, <44>, <45>, <46>, <47>,
|
||
|
|
<48>, <49>, <50>, <51>, <52>, <53>, <54>,
|
||
|
|
<55>, <56>, <57>, <58>, <59>, <60>, <61>,
|
||
|
|
<62>, <63>, <64>, <65>;
|
||
|
|
gpio-controller;
|
||
|
|
ngpios = <32>;
|
||
|
|
};
|
||
|
|
|
||
|
|
dmac0: dma-controller@50000000 {
|
||
|
|
compatible = "snps,axi-dma-1.01a";
|
||
|
|
reg = <0x50000000 0x1000>;
|
||
|
|
interrupts = <27>, <28>, <29>, <30>, <31>, <32>;
|
||
|
|
#dma-cells = <1>;
|
||
|
|
clocks = <&sysclk K210_CLK_DMA>, <&sysclk K210_CLK_DMA>;
|
||
|
|
clock-names = "core-clk", "cfgr-clk";
|
||
|
|
resets = <&sysrst K210_RST_DMA>;
|
||
|
|
dma-channels = <6>;
|
||
|
|
snps,dma-masters = <2>;
|
||
|
|
snps,priority = <0 1 2 3 4 5>;
|
||
|
|
snps,data-width = <5>;
|
||
|
|
snps,block-size = <0x200000 0x200000 0x200000
|
||
|
|
0x200000 0x200000 0x200000>;
|
||
|
|
snps,axi-max-burst-len = <256>;
|
||
|
|
};
|
||
|
|
|
||
|
|
apb0: bus@50200000 {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <1>;
|
||
|
|
compatible = "simple-pm-bus";
|
||
|
|
ranges = <0x50200000 0x50200000 0x200000>;
|
||
|
|
clocks = <&sysclk K210_CLK_APB0>;
|
||
|
|
|
||
|
|
gpio1: gpio@50200000 {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
compatible = "snps,dw-apb-gpio";
|
||
|
|
reg = <0x50200000 0x80>;
|
||
|
|
clocks = <&sysclk K210_CLK_APB0>,
|
||
|
|
<&sysclk K210_CLK_GPIO>;
|
||
|
|
clock-names = "bus", "db";
|
||
|
|
resets = <&sysrst K210_RST_GPIO>;
|
||
|
|
|
||
|
|
gpio1_0: gpio-port@0 {
|
||
|
|
#gpio-cells = <2>;
|
||
|
|
#interrupt-cells = <2>;
|
||
|
|
compatible = "snps,dw-apb-gpio-port";
|
||
|
|
reg = <0>;
|
||
|
|
interrupt-controller;
|
||
|
|
interrupts = <23>;
|
||
|
|
gpio-controller;
|
||
|
|
ngpios = <8>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
uart1: serial@50210000 {
|
||
|
|
compatible = "snps,dw-apb-uart";
|
||
|
|
reg = <0x50210000 0x100>;
|
||
|
|
interrupts = <11>;
|
||
|
|
clocks = <&sysclk K210_CLK_UART1>,
|
||
|
|
<&sysclk K210_CLK_APB0>;
|
||
|
|
clock-names = "baudclk", "apb_pclk";
|
||
|
|
resets = <&sysrst K210_RST_UART1>;
|
||
|
|
reg-io-width = <4>;
|
||
|
|
reg-shift = <2>;
|
||
|
|
dcd-override;
|
||
|
|
dsr-override;
|
||
|
|
cts-override;
|
||
|
|
ri-override;
|
||
|
|
};
|
||
|
|
|
||
|
|
uart2: serial@50220000 {
|
||
|
|
compatible = "snps,dw-apb-uart";
|
||
|
|
reg = <0x50220000 0x100>;
|
||
|
|
interrupts = <12>;
|
||
|
|
clocks = <&sysclk K210_CLK_UART2>,
|
||
|
|
<&sysclk K210_CLK_APB0>;
|
||
|
|
clock-names = "baudclk", "apb_pclk";
|
||
|
|
resets = <&sysrst K210_RST_UART2>;
|
||
|
|
reg-io-width = <4>;
|
||
|
|
reg-shift = <2>;
|
||
|
|
dcd-override;
|
||
|
|
dsr-override;
|
||
|
|
cts-override;
|
||
|
|
ri-override;
|
||
|
|
};
|
||
|
|
|
||
|
|
uart3: serial@50230000 {
|
||
|
|
compatible = "snps,dw-apb-uart";
|
||
|
|
reg = <0x50230000 0x100>;
|
||
|
|
interrupts = <13>;
|
||
|
|
clocks = <&sysclk K210_CLK_UART3>,
|
||
|
|
<&sysclk K210_CLK_APB0>;
|
||
|
|
clock-names = "baudclk", "apb_pclk";
|
||
|
|
resets = <&sysrst K210_RST_UART3>;
|
||
|
|
reg-io-width = <4>;
|
||
|
|
reg-shift = <2>;
|
||
|
|
dcd-override;
|
||
|
|
dsr-override;
|
||
|
|
cts-override;
|
||
|
|
ri-override;
|
||
|
|
};
|
||
|
|
|
||
|
|
spi2: spi@50240000 {
|
||
|
|
compatible = "canaan,k210-spi";
|
||
|
|
spi-slave;
|
||
|
|
reg = <0x50240000 0x100>;
|
||
|
|
#address-cells = <0>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
interrupts = <3>;
|
||
|
|
clocks = <&sysclk K210_CLK_SPI2>,
|
||
|
|
<&sysclk K210_CLK_APB0>;
|
||
|
|
clock-names = "ssi_clk", "pclk";
|
||
|
|
resets = <&sysrst K210_RST_SPI2>;
|
||
|
|
spi-max-frequency = <25000000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
i2s0: i2s@50250000 {
|
||
|
|
compatible = "canaan,k210-i2s", "snps,designware-i2s";
|
||
|
|
reg = <0x50250000 0x200>;
|
||
|
|
interrupts = <5>;
|
||
|
|
clocks = <&sysclk K210_CLK_I2S0>;
|
||
|
|
clock-names = "i2sclk";
|
||
|
|
resets = <&sysrst K210_RST_I2S0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
i2s1: i2s@50260000 {
|
||
|
|
compatible = "canaan,k210-i2s", "snps,designware-i2s";
|
||
|
|
reg = <0x50260000 0x200>;
|
||
|
|
interrupts = <6>;
|
||
|
|
clocks = <&sysclk K210_CLK_I2S1>;
|
||
|
|
clock-names = "i2sclk";
|
||
|
|
resets = <&sysrst K210_RST_I2S1>;
|
||
|
|
};
|
||
|
|
|
||
|
|
i2s2: i2s@50270000 {
|
||
|
|
compatible = "canaan,k210-i2s", "snps,designware-i2s";
|
||
|
|
reg = <0x50270000 0x200>;
|
||
|
|
interrupts = <7>;
|
||
|
|
clocks = <&sysclk K210_CLK_I2S2>;
|
||
|
|
clock-names = "i2sclk";
|
||
|
|
resets = <&sysrst K210_RST_I2S2>;
|
||
|
|
};
|
||
|
|
|
||
|
|
i2c0: i2c@50280000 {
|
||
|
|
compatible = "snps,designware-i2c";
|
||
|
|
reg = <0x50280000 0x100>;
|
||
|
|
interrupts = <8>;
|
||
|
|
clocks = <&sysclk K210_CLK_I2C0>,
|
||
|
|
<&sysclk K210_CLK_APB0>;
|
||
|
|
clock-names = "ref", "pclk";
|
||
|
|
resets = <&sysrst K210_RST_I2C0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
i2c1: i2c@50290000 {
|
||
|
|
compatible = "snps,designware-i2c";
|
||
|
|
reg = <0x50290000 0x100>;
|
||
|
|
interrupts = <9>;
|
||
|
|
clocks = <&sysclk K210_CLK_I2C1>,
|
||
|
|
<&sysclk K210_CLK_APB0>;
|
||
|
|
clock-names = "ref", "pclk";
|
||
|
|
resets = <&sysrst K210_RST_I2C1>;
|
||
|
|
};
|
||
|
|
|
||
|
|
i2c2: i2c@502a0000 {
|
||
|
|
compatible = "snps,designware-i2c";
|
||
|
|
reg = <0x502A0000 0x100>;
|
||
|
|
interrupts = <10>;
|
||
|
|
clocks = <&sysclk K210_CLK_I2C2>,
|
||
|
|
<&sysclk K210_CLK_APB0>;
|
||
|
|
clock-names = "ref", "pclk";
|
||
|
|
resets = <&sysrst K210_RST_I2C2>;
|
||
|
|
};
|
||
|
|
|
||
|
|
fpioa: pinmux@502b0000 {
|
||
|
|
compatible = "canaan,k210-fpioa";
|
||
|
|
reg = <0x502B0000 0x100>;
|
||
|
|
clocks = <&sysclk K210_CLK_FPIOA>,
|
||
|
|
<&sysclk K210_CLK_APB0>;
|
||
|
|
clock-names = "ref", "pclk";
|
||
|
|
resets = <&sysrst K210_RST_FPIOA>;
|
||
|
|
canaan,k210-sysctl-power = <&sysctl 108>;
|
||
|
|
};
|
||
|
|
|
||
|
|
timer0: timer@502d0000 {
|
||
|
|
compatible = "snps,dw-apb-timer";
|
||
|
|
reg = <0x502D0000 0x14>;
|
||
|
|
interrupts = <14>;
|
||
|
|
clocks = <&sysclk K210_CLK_TIMER0>,
|
||
|
|
<&sysclk K210_CLK_APB0>;
|
||
|
|
clock-names = "timer", "pclk";
|
||
|
|
resets = <&sysrst K210_RST_TIMER0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
timer1: timer@502d0014 {
|
||
|
|
compatible = "snps,dw-apb-timer";
|
||
|
|
reg = <0x502D0014 0x14>;
|
||
|
|
interrupts = <15>;
|
||
|
|
clocks = <&sysclk K210_CLK_TIMER0>,
|
||
|
|
<&sysclk K210_CLK_APB0>;
|
||
|
|
clock-names = "timer", "pclk";
|
||
|
|
resets = <&sysrst K210_RST_TIMER0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
timer2: timer@502e0000 {
|
||
|
|
compatible = "snps,dw-apb-timer";
|
||
|
|
reg = <0x502E0000 0x14>;
|
||
|
|
interrupts = <16>;
|
||
|
|
clocks = <&sysclk K210_CLK_TIMER1>,
|
||
|
|
<&sysclk K210_CLK_APB0>;
|
||
|
|
clock-names = "timer", "pclk";
|
||
|
|
resets = <&sysrst K210_RST_TIMER1>;
|
||
|
|
};
|
||
|
|
|
||
|
|
timer3: timer@502e0014 {
|
||
|
|
compatible = "snps,dw-apb-timer";
|
||
|
|
reg = <0x502E0014 0x114>;
|
||
|
|
interrupts = <17>;
|
||
|
|
clocks = <&sysclk K210_CLK_TIMER1>,
|
||
|
|
<&sysclk K210_CLK_APB0>;
|
||
|
|
clock-names = "timer", "pclk";
|
||
|
|
resets = <&sysrst K210_RST_TIMER1>;
|
||
|
|
};
|
||
|
|
|
||
|
|
timer4: timer@502f0000 {
|
||
|
|
compatible = "snps,dw-apb-timer";
|
||
|
|
reg = <0x502F0000 0x14>;
|
||
|
|
interrupts = <18>;
|
||
|
|
clocks = <&sysclk K210_CLK_TIMER2>,
|
||
|
|
<&sysclk K210_CLK_APB0>;
|
||
|
|
clock-names = "timer", "pclk";
|
||
|
|
resets = <&sysrst K210_RST_TIMER2>;
|
||
|
|
};
|
||
|
|
|
||
|
|
timer5: timer@502f0014 {
|
||
|
|
compatible = "snps,dw-apb-timer";
|
||
|
|
reg = <0x502F0014 0x14>;
|
||
|
|
interrupts = <19>;
|
||
|
|
clocks = <&sysclk K210_CLK_TIMER2>,
|
||
|
|
<&sysclk K210_CLK_APB0>;
|
||
|
|
clock-names = "timer", "pclk";
|
||
|
|
resets = <&sysrst K210_RST_TIMER2>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
apb1: bus@50400000 {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <1>;
|
||
|
|
compatible = "simple-pm-bus";
|
||
|
|
ranges = <0x50400000 0x50400000 0x40100>;
|
||
|
|
clocks = <&sysclk K210_CLK_APB1>;
|
||
|
|
|
||
|
|
wdt0: watchdog@50400000 {
|
||
|
|
compatible = "snps,dw-wdt";
|
||
|
|
reg = <0x50400000 0x100>;
|
||
|
|
interrupts = <21>;
|
||
|
|
clocks = <&sysclk K210_CLK_WDT0>,
|
||
|
|
<&sysclk K210_CLK_APB1>;
|
||
|
|
clock-names = "tclk", "pclk";
|
||
|
|
resets = <&sysrst K210_RST_WDT0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
wdt1: watchdog@50410000 {
|
||
|
|
compatible = "snps,dw-wdt";
|
||
|
|
reg = <0x50410000 0x100>;
|
||
|
|
interrupts = <22>;
|
||
|
|
clocks = <&sysclk K210_CLK_WDT1>,
|
||
|
|
<&sysclk K210_CLK_APB1>;
|
||
|
|
clock-names = "tclk", "pclk";
|
||
|
|
resets = <&sysrst K210_RST_WDT1>;
|
||
|
|
};
|
||
|
|
|
||
|
|
sysctl: syscon@50440000 {
|
||
|
|
compatible = "canaan,k210-sysctl",
|
||
|
|
"syscon", "simple-mfd";
|
||
|
|
reg = <0x50440000 0x100>;
|
||
|
|
clocks = <&sysclk K210_CLK_APB1>;
|
||
|
|
clock-names = "pclk";
|
||
|
|
|
||
|
|
sysclk: clock-controller {
|
||
|
|
#clock-cells = <1>;
|
||
|
|
compatible = "canaan,k210-clk";
|
||
|
|
clocks = <&in0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
sysrst: reset-controller {
|
||
|
|
compatible = "canaan,k210-rst";
|
||
|
|
#reset-cells = <1>;
|
||
|
|
};
|
||
|
|
|
||
|
|
reboot: syscon-reboot {
|
||
|
|
compatible = "syscon-reboot";
|
||
|
|
regmap = <&sysctl>;
|
||
|
|
offset = <48>;
|
||
|
|
mask = <1>;
|
||
|
|
value = <1>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
apb2: bus@52000000 {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <1>;
|
||
|
|
compatible = "simple-pm-bus";
|
||
|
|
ranges = <0x52000000 0x52000000 0x2000200>;
|
||
|
|
clocks = <&sysclk K210_CLK_APB2>;
|
||
|
|
|
||
|
|
spi0: spi@52000000 {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
compatible = "canaan,k210-spi";
|
||
|
|
reg = <0x52000000 0x100>;
|
||
|
|
interrupts = <1>;
|
||
|
|
clocks = <&sysclk K210_CLK_SPI0>,
|
||
|
|
<&sysclk K210_CLK_APB2>;
|
||
|
|
clock-names = "ssi_clk", "pclk";
|
||
|
|
resets = <&sysrst K210_RST_SPI0>;
|
||
|
|
reset-names = "spi";
|
||
|
|
num-cs = <4>;
|
||
|
|
reg-io-width = <4>;
|
||
|
|
};
|
||
|
|
|
||
|
|
spi1: spi@53000000 {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
compatible = "canaan,k210-spi";
|
||
|
|
reg = <0x53000000 0x100>;
|
||
|
|
interrupts = <2>;
|
||
|
|
clocks = <&sysclk K210_CLK_SPI1>,
|
||
|
|
<&sysclk K210_CLK_APB2>;
|
||
|
|
clock-names = "ssi_clk", "pclk";
|
||
|
|
resets = <&sysrst K210_RST_SPI1>;
|
||
|
|
reset-names = "spi";
|
||
|
|
num-cs = <4>;
|
||
|
|
reg-io-width = <4>;
|
||
|
|
};
|
||
|
|
|
||
|
|
spi3: spi@54000000 {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
compatible = "snps,dwc-ssi-1.01a";
|
||
|
|
reg = <0x54000000 0x200>;
|
||
|
|
interrupts = <4>;
|
||
|
|
clocks = <&sysclk K210_CLK_SPI3>,
|
||
|
|
<&sysclk K210_CLK_APB2>;
|
||
|
|
clock-names = "ssi_clk", "pclk";
|
||
|
|
resets = <&sysrst K210_RST_SPI3>;
|
||
|
|
reset-names = "spi";
|
||
|
|
|
||
|
|
num-cs = <4>;
|
||
|
|
reg-io-width = <4>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|