39 lines
1.0 KiB
Plaintext
39 lines
1.0 KiB
Plaintext
|
MT9M001: 1/2-Inch Megapixel Digital Image Sensor
|
||
|
|
|
||
|
|
The MT9M001 is an SXGA-format with a 1/2-inch CMOS active-pixel digital
|
||
|
|
image sensor. It is programmable through I2C interface.
|
||
|
|
|
||
|
|
Required Properties:
|
||
|
|
|
||
|
|
- compatible: shall be "onnn,mt9m001".
|
||
|
|
- clocks: reference to the master clock into sensor
|
||
|
|
|
||
|
|
Optional Properties:
|
||
|
|
|
||
|
|
- reset-gpios: GPIO handle which is connected to the reset pin of the chip.
|
||
|
|
Active low.
|
||
|
|
- standby-gpios: GPIO handle which is connected to the standby pin of the chip.
|
||
|
|
Active high.
|
||
|
|
|
||
|
|
The device node must contain one 'port' child node with one 'endpoint' child
|
||
|
|
sub-node for its digital output video port, in accordance with the video
|
||
|
|
interface bindings defined in:
|
||
|
|
Documentation/devicetree/bindings/media/video-interfaces.txt
|
||
|
|
|
||
|
|
Example:
|
||
|
|
|
||
|
|
&i2c1 {
|
||
|
|
camera-sensor@5d {
|
||
|
|
compatible = "onnn,mt9m001";
|
||
|
|
reg = <0x5d>;
|
||
|
|
reset-gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
|
||
|
|
standby-gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
|
||
|
|
clocks = <&camera_clk>;
|
||
|
|
port {
|
||
|
|
mt9m001_out: endpoint {
|
||
|
|
remote-endpoint = <&vcap_in>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|