From ee1ebda23e1555ade9571e98d8508d97f4e60dfc Mon Sep 17 00:00:00 2001 From: Rich Felker Date: Sun, 1 May 2016 05:36:28 +0000 Subject: [PATCH] overhaul build process with litecross, next-gen top-level makefile --- .gitignore | 6 +- Makefile | 199 ++++++++++++-------------- README.md | 140 ++++++++++++++---- config.mak.dist | 63 +++++--- hashes/binutils-2.25.1.tar.bz2.sha1 | 1 + hashes/binutils-397a64b3.tar.bz2.sha1 | 1 + hashes/config.sub.3d5db9ebe860.sha1 | 1 + hashes/gcc-4.2.1.tar.bz2.sha1 | 1 + hashes/gcc-4.7.4.tar.bz2.sha1 | 1 + hashes/gcc-5.2.0.tar.bz2.sha1 | 1 + hashes/gmp-6.1.0.tar.bz2.sha1 | 1 + hashes/mpc-1.0.3.tar.gz.sha1 | 1 + hashes/mpfr-3.1.4.tar.bz2.sha1 | 1 + hashes/musl-1.1.14.tar.gz.sha1 | 1 + litecross/Makefile | 132 +++++++++++++++++ 15 files changed, 391 insertions(+), 159 deletions(-) create mode 100644 hashes/binutils-2.25.1.tar.bz2.sha1 create mode 100644 hashes/binutils-397a64b3.tar.bz2.sha1 create mode 100644 hashes/config.sub.3d5db9ebe860.sha1 create mode 100644 hashes/gcc-4.2.1.tar.bz2.sha1 create mode 100644 hashes/gcc-4.7.4.tar.bz2.sha1 create mode 100644 hashes/gcc-5.2.0.tar.bz2.sha1 create mode 100644 hashes/gmp-6.1.0.tar.bz2.sha1 create mode 100644 hashes/mpc-1.0.3.tar.gz.sha1 create mode 100644 hashes/mpfr-3.1.4.tar.bz2.sha1 create mode 100644 hashes/musl-1.1.14.tar.gz.sha1 create mode 100644 litecross/Makefile diff --git a/.gitignore b/.gitignore index 3e8396c..bb828c6 100644 --- a/.gitignore +++ b/.gitignore @@ -3,4 +3,8 @@ /output/ /binutils-*/ /gcc-*/ -/musl/ +/musl-*/ +/gmp-*/ +/mpc-*/ +/mpfr-*/ +/build-*/ diff --git a/Makefile b/Makefile index d39f35d..e85ccba 100644 --- a/Makefile +++ b/Makefile @@ -2,154 +2,137 @@ OUTPUT = $(PWD)/output SOURCES = sources +CONFIG_SUB_REV = 3d5db9ebe860 BINUTILS_VER = 2.25.1 GCC_VER = 5.2.0 -MUSL_TAG = master +MUSL_VER = 1.1.14 +GMP_VER = 6.1.0 +MPC_VER = 1.0.3 +MPFR_VER = 3.1.4 -GNU_SITE = http://ftp.gnu.org/pub/gnu +GNU_SITE = https://ftp.gnu.org/pub/gnu GCC_SITE = $(GNU_SITE)/gcc BINUTILS_SITE = $(GNU_SITE)/binutils +GMP_SITE = $(GNU_SITE)/gmp +MPC_SITE = $(GNU_SITE)/mpc +MPFR_SITE = $(GNU_SITE)/mpfr -COMMON_CONFIG = --disable-werror \ - --target=$(TARGET) --prefix=$(OUTPUT) \ - --with-sysroot=$(OUTPUT)/$(TARGET) +MUSL_SITE = https://www.musl-libc.org/releases +MUSL_REPO = git://git.musl-libc.org/musl -BINUTILS_CONFIG = $(COMMON_CONFIG) -GCC_CONFIG = $(COMMON_CONFIG) --enable-tls \ - --disable-libmudflap --disable-libsanitizer - -GCC0_VARS = CFLAGS="-O0 -g0" CXXFLAGS="-O0 -g0" -GCC0_CONFIG = $(GCC_CONFIG) \ - --with-newlib --disable-libssp --disable-threads \ - --disable-shared --disable-libgomp --disable-libatomic \ - --disable-libquadmath --disable-decimal-float --disable-nls \ - --enable-languages=c - -GCC0_BDIR = $(PWD)/gcc-$(GCC_VER)/build0/gcc -GCC0_CC = $(GCC0_BDIR)/xgcc -B $(GCC0_BDIR) - -MUSL_CONFIG = CC="$(GCC0_CC)" --prefix= +BUILD_DIR = build-$(TARGET) -include config.mak -ifeq ($(TARGET),) -$(error TARGET must be set via config.mak or command line) -endif +SRC_DIRS = gcc-$(GCC_VER) binutils-$(BINUTILS_VER) musl-$(MUSL_VER) \ + $(if $(GMP_VER),gmp-$(GMP_VER)) \ + $(if $(MPC_VER),mpc-$(MPC_VER)) \ + $(if $(MPFR_VER),mpfr-$(MPFR_VER)) -all: install_binutils install_musl install_gcc +all: clean: - rm -rf gcc-$(GCC_VER) binutils-$(BINUTILS_VER) musl + rm -rf gcc-* binutils-* musl-* gmp-* mpc-* mpfr-* build-* distclean: clean rm -rf sources -.PHONY: extract_binutils extract_gcc clone_musl -.PHONY: configure_binutils configure_gcc0 configure_gcc configure_musl -.PHONY: build_binutils build_gcc0 build_gcc build_musl -.PHONY: install_binutils install_gcc install_musl -extract_binutils: binutils-$(BINUTILS_VER)/.mcm_extracted -extract_gcc: gcc-$(GCC_VER)/.mcm_extracted -clone_musl: musl/.mcm_cloned +# Rules for downloading and verifying sources. Treat an external SOURCES path as +# immutable and do not try to download anything into it. -configure_binutils: binutils-$(BINUTILS_VER)/.mcm_configured -configure_gcc0: gcc-$(GCC_VER)/build0/.mcm_configured -configure_gcc: gcc-$(GCC_VER)/build/.mcm_configured -configure_musl: musl/.mcm_configured - -build_binutils: binutils-$(BINUTILS_VER)/.mcm_built -build_gcc0: gcc-$(GCC_VER)/build0/.mcm_built -build_gcc: gcc-$(GCC_VER)/build/.mcm_built -build_musl: musl/.mcm_built - -install_binutils: binutils-$(BINUTILS_VER)/.mcm_installed -install_gcc: gcc-$(GCC_VER)/build/.mcm_installed -install_musl: musl/.mcm_installed +ifeq ($(SOURCES),sources) +$(patsubst hashes/%.sha1,$(SOURCES)/%,$(wildcard hashes/gmp*)): SITE = $(GMP_SITE) +$(patsubst hashes/%.sha1,$(SOURCES)/%,$(wildcard hashes/mpc*)): SITE = $(MPC_SITE) +$(patsubst hashes/%.sha1,$(SOURCES)/%,$(wildcard hashes/mpfr*)): SITE = $(MPFR_SITE) +$(patsubst hashes/%.sha1,$(SOURCES)/%,$(wildcard hashes/binutils*)): SITE = $(BINUTILS_SITE) +$(patsubst hashes/%.sha1,$(SOURCES)/%,$(wildcard hashes/gcc*)): SITE = $(GCC_SITE)/$(basename $(basename $(notdir $@))) +$(patsubst hashes/%.sha1,$(SOURCES)/%,$(wildcard hashes/musl*)): SITE = $(MUSL_SITE) $(SOURCES): mkdir -p $@ $(SOURCES)/config.sub: | $(SOURCES) - wget -O $@ 'http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD' + mkdir -p $@.tmp + cd $@.tmp && wget -c -O $(notdir $@) "http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=$(CONFIG_SUB_REV)" + cd $@.tmp && touch $(notdir $@) + cd $@.tmp && sha1sum -c $(PWD)/hashes/$(notdir $@).$(CONFIG_SUB_REV).sha1 + mv $@.tmp/$(notdir $@) $@ + rm -rf $@.tmp -$(SOURCES)/binutils-%: | $(SOURCES) - wget -c -O $@.part $(BINUTILS_SITE)/$(notdir $@) - mv $@.part $@ +$(SOURCES)/%: hashes/%.sha1 | $(SOURCES) + mkdir -p $@.tmp + cd $@.tmp && wget -c -O $(notdir $@) $(SITE)/$(notdir $@) + cd $@.tmp && touch $(notdir $@) + cd $@.tmp && sha1sum -c $(PWD)/hashes/$(notdir $@).sha1 + mv $@.tmp/$(notdir $@) $@ + rm -rf $@.tmp -$(SOURCES)/gcc-%: | $(SOURCES) - wget -c -O $@.part $(GCC_SITE)/$(basename $(basename $(notdir $@)))/$(notdir $@) - mv $@.part $@ +endif +# Rules for extracting and patching sources, or checking them out from git. -binutils-$(BINUTILS_VER)/.mcm_extracted: $(SOURCES)/binutils-$(BINUTILS_VER).tar.bz2 $(SOURCES)/config.sub - tar jxvf $< - cat patches/binutils-$(BINUTILS_VER)/* | ( cd binutils-$(BINUTILS_VER) && patch -p1 ) - cp $(SOURCES)/config.sub binutils-$(BINUTILS_VER) - touch $@ +musl-git-%: + rm -rf $@.tmp + git clone -b $(patsubst musl-git-%,%,$@) $(MUSL_REPO) $@.tmp + cd $@.tmp && git fsck + mv $@.tmp $@ -binutils-$(BINUTILS_VER)/.mcm_configured: binutils-$(BINUTILS_VER)/.mcm_extracted - test -e binutils-$(BINUTILS_VER)/config.status || ( cd binutils-$(BINUTILS_VER) && ./configure $(BINUTILS_CONFIG) ) - touch $@ +%: $(SOURCES)/%.tar.gz | $(SOURCES)/config.sub + rm -rf $@.tmp + mkdir $@.tmp + ( cd $@.tmp && tar zxvf - ) < $< + test ! -d patches/$@ || cat patches/$@/* | ( cd $@.tmp/$@ && patch -p1 ) + test ! -f $@.tmp/$@/config.sub || cp -f $(SOURCES)/config.sub $@.tmp/$@ + rm -rf $@ + touch $@.tmp/$@ + mv $@.tmp/$@ $@ + rm -rf $@.tmp -binutils-$(BINUTILS_VER)/.mcm_built: binutils-$(BINUTILS_VER)/.mcm_configured - cd binutils-$(BINUTILS_VER) && $(MAKE) - touch $@ - -binutils-$(BINUTILS_VER)/.mcm_installed: binutils-$(BINUTILS_VER)/.mcm_built - cd binutils-$(BINUTILS_VER) && $(MAKE) install - touch $@ +%: $(SOURCES)/%.tar.bz2 | $(SOURCES)/config.sub + rm -rf $@.tmp + mkdir $@.tmp + ( cd $@.tmp && tar jxvf - ) < $< + test ! -d patches/$@ || cat patches/$@/* | ( cd $@.tmp/$@ && patch -p1 ) + test ! -f $@.tmp/$@/config.sub || cp -f $(SOURCES)/config.sub $@.tmp/$@ + rm -rf $@ + touch $@.tmp/$@ + mv $@.tmp/$@ $@ + rm -rf $@.tmp +# Rules for building. +ifeq ($(TARGET),) -gcc-$(GCC_VER)/.mcm_extracted: $(SOURCES)/gcc-$(GCC_VER).tar.bz2 $(SOURCES)/config.sub - tar jxvf $< - cat patches/gcc-$(GCC_VER)/* | ( cd gcc-$(GCC_VER) && patch -p1 ) - cp $(SOURCES)/config.sub gcc-$(GCC_VER) - touch $@ +all: + @echo TARGET must be set via config.mak or command line. + @exit 1 -gcc-$(GCC_VER)/build0/.mcm_configured: gcc-$(GCC_VER)/.mcm_extracted | binutils-$(BINUTILS_VER)/.mcm_installed - mkdir -p gcc-$(GCC_VER)/build0 - test -e gcc-$(GCC_VER)/build0/config.status || ( cd gcc-$(GCC_VER)/build0 && $(GCC0_VARS) ../configure $(GCC0_CONFIG) ) - touch $@ +else -gcc-$(GCC_VER)/build0/.mcm_built: gcc-$(GCC_VER)/build0/.mcm_configured - cd gcc-$(GCC_VER)/build0 && $(MAKE) - touch $@ +$(BUILD_DIR): + mkdir -p $@ -gcc-$(GCC_VER)/build/.mcm_configured: gcc-$(GCC_VER)/.mcm_extracted | binutils-$(BINUTILS_VER)/.mcm_installed musl/.mcm_installed - mkdir -p gcc-$(GCC_VER)/build - test -e gcc-$(GCC_VER)/build/config.status || ( cd gcc-$(GCC_VER)/build && ../configure $(GCC_CONFIG) ) - touch $@ +$(BUILD_DIR)/Makefile: | $(BUILD_DIR) + ln -sf ../litecross/Makefile $@ -gcc-$(GCC_VER)/build/.mcm_built: gcc-$(GCC_VER)/build/.mcm_configured - cd gcc-$(GCC_VER)/build && $(MAKE) - touch $@ +$(BUILD_DIR)/config.mak: | $(BUILD_DIR) + printf >$@ -- '%s\n' \ + "MUSL_SRCDIR = ../musl-$(MUSL_VER)" \ + "GCC_SRCDIR = ../gcc-$(GCC_VER)" \ + "BINUTILS_SRCDIR = ../binutils-$(BINUTILS_VER)" \ + $(if $(GMP_VER),"GMP_SRCDIR = ../gmp-$(GMP_VER)") \ + $(if $(MPC_VER),"MPC_SRCDIR = ../mpc-$(MPC_VER)") \ + $(if $(MPFR_VER),"MPFR_SRCDIR = ../mpfr-$(MPFR_VER)") \ + "-include ../config.mak" -gcc-$(GCC_VER)/build/.mcm_installed: gcc-$(GCC_VER)/build/.mcm_built - cd gcc-$(GCC_VER)/build && $(MAKE) install - touch $@ +all: | $(SRC_DIRS) $(BUILD_DIR) $(BUILD_DIR)/Makefile $(BUILD_DIR)/config.mak + cd $(BUILD_DIR) && $(MAKE) $@ +install: | $(SRC_DIRS) $(BUILD_DIR) $(BUILD_DIR)/Makefile $(BUILD_DIR)/config.mak + cd $(BUILD_DIR) && $(MAKE) OUTPUT=$(OUTPUT) $@ - - - -musl/.mcm_cloned: - test -d musl || git clone -b $(MUSL_TAG) git://git.musl-libc.org/musl musl - touch $@ - -musl/.mcm_configured: musl/.mcm_cloned gcc-$(GCC_VER)/build0/.mcm_built - cd musl && ./configure $(MUSL_CONFIG) - touch $@ - -musl/.mcm_built: musl/.mcm_configured - cd musl && $(MAKE) AR=$(OUTPUT)/bin/$(TARGET)-ar RANLIB=$(OUTPUT)/bin/$(TARGET)-ranlib - touch $@ - -musl/.mcm_installed: musl/.mcm_built - cd musl && $(MAKE) install DESTDIR=$(OUTPUT)/$(TARGET) - ln -sfn . $(OUTPUT)/$(TARGET)/usr - touch $@ +endif diff --git a/README.md b/README.md index a4c54ee..1d1fc8c 100644 --- a/README.md +++ b/README.md @@ -1,17 +1,117 @@ musl-cross-make =============== -This is a quick and simple makefile-based alternative for producing -musl-based cross compilers. The current focus is on SH2/J2 Core -targets and NOMMU (where PIE or FDPIC is mandatory) since these are -not adequately supported by other musl cross-compiler toolchain build -systems, but all musl-supported targets are intended to work. +This is a the second generation of musl-cross-make, a fast, simple, +but advanced makefile-based approach for producing musl-targeting +cross compilers. Features include: -In addition to the build system, musl-cross-make provides a number of -patches, including: +- Single-stage GCC build, used to build both musl libc and its own + shared target libs depending on libc. -- Updated versions of the musl target patches going into upstream GCC -- Static-PIE support and optionally defaulting to PIE +- No hard-coded absoluete paths; resulting cross compilers can be + copied/moved anywhere. + +- Ability to build multiple cross compilers for different targets + using a single set of patched source trees. + +- Nothing is installed until running "make install", and the + installation location can be chosen at install time. + +- Automatic download of source packages, including GCC prerequisites + (GMP, MPC, MPFR), using https and checking hashes. + +- Automatic patching with canonical musl support patches and patches + which provide bug fixes and features musl depends on for some arch + targets. + + +Usage +----- + +The build system can be configured by providing a config.mak file in +the top-level directory. The only mandatory variable is TARGET, which +should contain a gcc target tuple (such as i486-linux-musl), but many +more options are available. See the provided config.mak.dist and +presets/* for examples. + +To compile, run make. To install to $(OUTPUT), run "make install". + +The default value for $(OUTPUT) is output; after installing here you +can move the cross compiler toolchain to another location as desired. + + + +How it works +------------ + +The current musl-cross-make is factored into two layers: + +1. The top-level Makefile which is responsible for downloading, + verifying, extracting, and patching sources, and for setting up a + build directory, and + +2. Litecross, the cross compiler build system, which is itself a + Makefile symlinked into the build directory. + +Most of the real magic takes place in litecross. It begins by setting +up symlinks to all the source trees provided to it by the caller, then +builds a combined "src_toolchain" directory of symlinks that combines +the contents of the top-level gcc and binutils source trees and +symlinks to gmp, mpc, and mpfr. One configured invocation them +configures all the GNU toolchain components together in a manner that +does not require any of them to be installed in order for the others +to use them. + +Rather than building the whole toolchain tree at once, though, +litecross starts by building just the gcc directory and its +prerequisites, to get an "xgcc" that can be used to configure musl. It +then configures musl, installs musl's headers to a staging "build +sysroot", and builds libgcc.a using those headers. At this point it +has all the prerequisites to build musl libc.a and libc.so, which the +rest of the gcc target-libs depend on; once they are built, the full +toolchain "make all" can proceed. + +Litecross does not actually depend on the musl-cross-make top-level +build system; it can be used with any pre-extracted, properly patched +set of source trees. + + +Project scope and goals +----------------------- + +The primary goals of this project are to: + +- Provide canonical musl support patches for GCC and binutils. + +- Serve as a canonical example of how GCC should be built to target + musl. + +- Streamline the production of musl-targeting cross compilers so that + musl users can easily produce musl-linked applications or bootstrap + new systems using musl. + +- Assist musl and toolchain developers in development and testing. + +While the patches applied to GCC and binutils are all intended not to +break non-musl configurations, musl-cross-make itself is specific to +musl. Changes to add support for exotic target variants outside of +what upstream musl supports are probably out-of-scope unless they are +non-invasive. Changes to fix issues building musl-cross-make to run on +non-Linux systems are well within scope as long as they are clean. + +Most importantly, this is a side project to benefit musl and its +users. It's not intended to be something high-maintenance or to divert +development effort away from musl itself. + + +Patches included +---------------- + +In addition to canonical musl support patches for GCC, +musl-cross-make's patch set provides: + +- Static-linked PIE support +- Addition of --enable-default-pie - Fixes for SH-specific bugs and bitrot in GCC - Support for J2 Core CPU target in GCC & binutils - SH/FDPIC ABI support @@ -22,25 +122,3 @@ build systems, if desired. Some functionality (SH/FDPIC, and support for J2 specific features) is presently only available with gcc 5.2.0 and binutils 2.25.1. - - -Usage ------ - -The build system make be configured by providing a config.mak file in -the top-level directory. The only mandatory variable is TARGET, which -should contain a gcc target tuple (such as sh2eb-linux-musl), but many -more options are available. The top-level config.mak.dist file shows -examples, and several full configurations are available in presets/*. - -For recent gcc versions that need gmp/mpfr/mpc, suitable versions need -to be installed in the default library path, or the appropriate --with -configure options need to be added to GCC_CONFIG in config.mak so that -the gcc configure process can find them. - -After setting up config.mak, simply run make. Parallel builds are -supported. - -The resulting toolchain will be placed ./output by default, or the -OUTPUT directory specified in config.mak. It is sysrooted and can be -freely moved to a different location. diff --git a/config.mak.dist b/config.mak.dist index 4a2e5f1..a152743 100644 --- a/config.mak.dist +++ b/config.mak.dist @@ -1,14 +1,37 @@ -OUTPUT = $(PWD)/output -TARGET = sh2eb-linux-musl +# +# config.mak.dist - sample musl-cross-make configuration +# +# Copy to config.mak and edit as desired. +# -# See the patches directory for supported versions. Versions -# without patches should not be expected to work until gcc 6. -# Older versions may have known bugs or limited functionality. +# There is no default TARGET; you must select one here or on the make +# command line. Some examples: -BINUTILS_VER = 2.25.1 -GCC_VER = 5.2.0 +# TARGET = i486-linux-musl +# TARGET = x86_64-linux-musl +# TARGET = arm-linux-musleabi +# TARGET = arm-linux-musleabihf +# TARGET = sh2eb-linux-muslfdpic +# ... -# Recommended options for faster/simpler build +# By default, cross compilers are installed to ./output under the top-level +# musl-cross-make directory and can later be moved wherever you want them. +# To install directly to a specific location, set it here. Multiple targets +# can safely be installed in the same location. Some examples: + +# OUTPUT = /opt/cross +# OUTPUT = /usr/local + +# By default, latest supported release versions of musl and the toolchain +# components are used. You can override those here, but the version selected +# must be supported (under hashes/ and patches/) to work. For musl, you +# can use "git-refname" (e.g. git-master) instead of a release. + +# BINUTILS_VER = 2.25.1 +# GCC_VER = 5.2.0 +# MUSL_VER = git-master + +# Recommended options for faster/simpler build: # COMMON_CONFIG += --disable-nls # COMMON_CONFIG += MAKEINFO=/bin/false @@ -16,17 +39,19 @@ GCC_VER = 5.2.0 # GCC_CONFIG += --disable-libquadmath --disable-decimal-float # GCC_CONFIG += --disable-multilib -# J2/SH2 specific options +# The following are options needed to make certain targets work right. +# They may be moved to main build logic rather than config.mak at some +# point in the future. -# GCC_CONFIG += --with-cpu=mj2 -# GCC_CONFIG += --enable-fdpic +ifeq ($(TARGET),sh2eb-linux-muslfdpic) +GCC_CONFIG += --with-cpu=mj2 +GCC_CONFIG += --enable-fdpic +endif -# Options for using (plain, non-FDPIC) ELF on NOMMU targets +ifeq ($(TARGET),mips64-linux-musl) +GCC_CONFIG += --with-abi=64 +endif -# GCC_CONFIG += --enable-default-pie - -# Last GPLv2 versions - -# GCC_VER = 4.2.1 -# BINUTILS_VER = 397a64b3 -# BINUTILS_SITE = http://landley.net/aboriginal/mirror +ifeq ($(TARGET),arm-linux-musleabihf) +GCC_CONFIG += --with-float=hard +endif diff --git a/hashes/binutils-2.25.1.tar.bz2.sha1 b/hashes/binutils-2.25.1.tar.bz2.sha1 new file mode 100644 index 0000000..5558010 --- /dev/null +++ b/hashes/binutils-2.25.1.tar.bz2.sha1 @@ -0,0 +1 @@ +1d597ae063e3947a5f61e23ceda8aebf78405fcd binutils-2.25.1.tar.bz2 diff --git a/hashes/binutils-397a64b3.tar.bz2.sha1 b/hashes/binutils-397a64b3.tar.bz2.sha1 new file mode 100644 index 0000000..9cb43bd --- /dev/null +++ b/hashes/binutils-397a64b3.tar.bz2.sha1 @@ -0,0 +1 @@ +f74f1ce2e62c516ba832f99a94289930be7869cf binutils-397a64b3.tar.bz2 diff --git a/hashes/config.sub.3d5db9ebe860.sha1 b/hashes/config.sub.3d5db9ebe860.sha1 new file mode 100644 index 0000000..8c99222 --- /dev/null +++ b/hashes/config.sub.3d5db9ebe860.sha1 @@ -0,0 +1 @@ +7d66e32bb3cce017e1cc9bef59fb6f8271fb7fec config.sub diff --git a/hashes/gcc-4.2.1.tar.bz2.sha1 b/hashes/gcc-4.2.1.tar.bz2.sha1 new file mode 100644 index 0000000..44a501f --- /dev/null +++ b/hashes/gcc-4.2.1.tar.bz2.sha1 @@ -0,0 +1 @@ +b8a55b13c4e38fae78d5db9a456e2d4ffe003118 gcc-4.2.1.tar.bz2 diff --git a/hashes/gcc-4.7.4.tar.bz2.sha1 b/hashes/gcc-4.7.4.tar.bz2.sha1 new file mode 100644 index 0000000..7054c74 --- /dev/null +++ b/hashes/gcc-4.7.4.tar.bz2.sha1 @@ -0,0 +1 @@ +f3359a157b3536f289c155363f1736a2c9b414db gcc-4.7.4.tar.bz2 diff --git a/hashes/gcc-5.2.0.tar.bz2.sha1 b/hashes/gcc-5.2.0.tar.bz2.sha1 new file mode 100644 index 0000000..01ab420 --- /dev/null +++ b/hashes/gcc-5.2.0.tar.bz2.sha1 @@ -0,0 +1 @@ +fe3f5390949d47054b613edc36c557eb1d51c18e gcc-5.2.0.tar.bz2 diff --git a/hashes/gmp-6.1.0.tar.bz2.sha1 b/hashes/gmp-6.1.0.tar.bz2.sha1 new file mode 100644 index 0000000..b1b7cf9 --- /dev/null +++ b/hashes/gmp-6.1.0.tar.bz2.sha1 @@ -0,0 +1 @@ +db38c7b67f8eea9f2e5b8a48d219165b2fdab11f gmp-6.1.0.tar.bz2 diff --git a/hashes/mpc-1.0.3.tar.gz.sha1 b/hashes/mpc-1.0.3.tar.gz.sha1 new file mode 100644 index 0000000..b0eabb9 --- /dev/null +++ b/hashes/mpc-1.0.3.tar.gz.sha1 @@ -0,0 +1 @@ +b8be66396c726fdc36ebb0f692ed8a8cca3bcc66 mpc-1.0.3.tar.gz diff --git a/hashes/mpfr-3.1.4.tar.bz2.sha1 b/hashes/mpfr-3.1.4.tar.bz2.sha1 new file mode 100644 index 0000000..d68955e --- /dev/null +++ b/hashes/mpfr-3.1.4.tar.bz2.sha1 @@ -0,0 +1 @@ +e3b0af77f18505184410d621fe0aae179e229dba mpfr-3.1.4.tar.bz2 diff --git a/hashes/musl-1.1.14.tar.gz.sha1 b/hashes/musl-1.1.14.tar.gz.sha1 new file mode 100644 index 0000000..18c2e94 --- /dev/null +++ b/hashes/musl-1.1.14.tar.gz.sha1 @@ -0,0 +1 @@ +b71208e87e66ac959d0e413dd444279d28a7bff1 musl-1.1.14.tar.gz diff --git a/litecross/Makefile b/litecross/Makefile new file mode 100644 index 0000000..8657c56 --- /dev/null +++ b/litecross/Makefile @@ -0,0 +1,132 @@ + +OUTPUT = $(PWD)/output + +BINUTILS_SRCDIR = BINUTILS_SRCDIR_not_set +GCC_SRCDIR = GCC_SRCDIR_not_set +MUSL_SRCDIR = MUSL_SRCDIR_not_set + +COMMON_CONFIG = +GCC_CONFIG = $(COMMON_CONFIG) +TOOLCHAIN_CONFIG = $(GCC_CONFIG) + +XGCC_DIR = ../obj_toolchain/gcc +XGCC = $(XGCC_DIR)/xgcc -B $(XGCC_DIR) +MUSL_CONFIG = CC="$(XGCC)" LIBCC="../obj_toolchain/$(TARGET)/libgcc/libgcc.a" --prefix= + +-include config.mak + +FULL_TOOLCHAIN_CONFIG = $(TOOLCHAIN_CONFIG) \ + --disable-werror \ + --target=$(TARGET) --prefix= \ + --with-sysroot=/$(TARGET) \ + --with-build-sysroot='$$(LC_ROOT)/obj_sysroot' \ + --enable-tls \ + --disable-libmudflap --disable-libsanitizer + +MUSL_VARS = AR=../obj_toolchain/binutils/ar RANLIB=../obj_toolchain/binutils/ranlib + +ifeq ($(TARGET),) + +all: + @echo TARGET must be set. + @exit 1 + +install: all + +else + +all: musl toolchain + +install: install-musl install-toolchain + +musl: obj_musl/.lc_built + +toolchain: obj_toolchain/.lc_built + +.PHONY: all musl toolchain install-musl install-toolchain clean + +src_binutils: | $(BINUTILS_SRCDIR) + ln -sf $(BINUTILS_SRCDIR) $@ + +src_gcc: | $(GCC_SRCDIR) + ln -sf $(GCC_SRCDIR) $@ + +src_musl: | $(MUSL_SRCDIR) + ln -sf $(MUSL_SRCDIR) $@ + +src_gmp: | $(GMP_SRCDIR) + ln -sf "$(GMP_SRCDIR)" $@ + +src_mpc: | $(MPC_SRCDIR) + ln -sf "$(MPC_SRCDIR)" $@ + +src_mpfr: | $(GMP_SRCDIR) + ln -sf "$(MPFR_SRCDIR)" $@ + +src_toolchain: src_binutils src_gcc src_gmp src_mpc src_mpfr + rm -rf $@ $@.tmp + mkdir $@.tmp + cd $@.tmp && ln -sf ../src_binutils/* . + cd $@.tmp && ln -sf ../src_gcc/* . + cd $@.tmp && ln -sf ../src_gmp gmp + cd $@.tmp && ln -sf ../src_mpc mpc + cd $@.tmp && ln -sf ../src_mpfr mpfr + mv $@.tmp $@ + +obj_%: + mkdir -p $@ + +obj_sysroot/include: + mkdir -p $@ + +obj_sysroot/usr: | obj_sysroot + ln -sf . $@ + +obj_sysroot/lib64: | obj_sysroot + ln -sf lib $@ + +obj_toolchain/.lc_configured: | obj_toolchain src_toolchain + cd obj_toolchain && ../src_toolchain/configure $(FULL_TOOLCHAIN_CONFIG) + touch $@ + +obj_toolchain/gcc/.lc_built: | obj_toolchain/.lc_configured obj_sysroot/usr obj_sysroot/lib64 obj_sysroot/include + cd obj_toolchain && $(MAKE) LC_ROOT=$(PWD) all-gcc + touch $@ + +obj_musl/.lc_configured: | obj_toolchain/gcc/.lc_built obj_musl src_musl + cd obj_musl && ../src_musl/configure $(MUSL_CONFIG) + touch $@ + +obj_sysroot/.lc_headers: | obj_musl/.lc_configured obj_sysroot + cd obj_musl && $(MAKE) DESTDIR=$(PWD)/obj_sysroot install-headers + touch $@ + +obj_toolchain/$(TARGET)/libgcc/.lc_configured: | obj_sysroot/.lc_headers + cd obj_toolchain && $(MAKE) LC_ROOT=$(PWD) configure-target-libgcc + touch $@ + +obj_toolchain/$(TARGET)/libgcc/libgcc.a: | obj_toolchain/$(TARGET)/libgcc/.lc_configured + cd $(dir $@) && $(MAKE) LC_ROOT=$(PWD) libgcc.a + +obj_musl/.lc_built: | obj_toolchain/$(TARGET)/libgcc/libgcc.a + cd obj_musl && $(MAKE) $(MUSL_VARS) + touch $@ + +obj_sysroot/.lc_libs: | obj_musl/.lc_built + cd obj_musl && $(MAKE) $(MUSL_VARS) DESTDIR=$(PWD)/obj_sysroot install + touch $@ + +obj_toolchain/.lc_built: | obj_toolchain/.lc_configured obj_sysroot/.lc_libs + cd obj_toolchain && $(MAKE) LC_ROOT=$(PWD) + touch $@ + +install-musl: | obj_musl/.lc_built + cd obj_musl && $(MAKE) $(MUSL_VARS) DESTDIR=$(DESTDIR)$(OUTPUT)/$(TARGET) install + +install-toolchain: | obj_toolchain/.lc_built + cd obj_toolchain && $(MAKE) LC_ROOT=$(PWD) DESTDIR=$(DESTDIR)$(OUTPUT) install + +endif + +clean: + rm -rf src_* obj_*